Cry room audio discovered.

To all of you who helped me trace problems with the audio in the cry rooms Thank You!! Randy Carson came up with the final answer!! There are two fuses above the ceiling in the rooms. 250W 1.5A. Randy told me that a couple years ago they had the same problem and blew out the transformers on the speakers. That is now repaired.

The Amp that powers this is way over power for those speakers. They only handle 30 watts at the most. So, the amp should never be higher than 1/4 power, which doesn't show signal on the amp but gives you full spectrum in the rooms.

I have also relocated the amp to the storage shelf on the side where the label printer is. Cleaned up the 5 terminations and 4 splices to one leading into the Amp cleaning up any problems that might occur. Also, spare fuses are in the yellow tool box top cover.

At the Sound desk the distribution marked 'Cry Rooms' is correct and should also never go above 12:00.

Thanks to all those that gave me time and talent to trace and discover the problem. Randy gets the prize this time!!